[Orca-users] Re: Half my rrds are missing
bajones at SKY.NET
bajones at SKY.NET
Thu Aug 30 14:53:45 PDT 2001
yes, vanilla. I tarred the existing orca setup that I had on another
server, untarred it over on these new servers, and then ran the same
configuration. I've actually done this on a bunch of servers but
its just this particular new group that is having these problems.
This is the data from one of the percol files -
::::::::::::::
percol-2001-08-13
::::::::::::::
timestamp locltime DNnsrkcmdit uptime usr% sys% 1runq 5runq
15runq #proc scanrate #proc/s #proc/p5s smtx smtx/cpu nc
pus mntC_/ mntU_/ mntA_/ mntP_/ mntc_/ mntu_/ mnta_/ mntp_/ mntC_/usr
mntU_/usr mntA_/usr mntP_/usr mntc_/usr mntu_/usr mnta
_/usr mntp_/usr mntC_/opt mntU_/opt mntA_/opt mntP_/opt mntc_/opt
mntu_/opt mnta_/opt mntp_/opt mntC_/u02 mntU_/u02 mntA_/u0
2 mntP_/u02 mntc_/u02 mntu_/u02 mnta_/u02 mntp_/u02 mntC_/u01
mntU_/u01 mntA_/u01 mntP_/u01 mntc_/u01 mntu_/u01 mnta_/u01 mn
tp_/u01 mntC_/home mntU_/home mntA_/home mntP_/home mntc_/home
mntu_/home mnta_/home mntp_/home mntC_/var/crash mntU_/var/cr
ash mntA_/var/crash mntP_/var/crash mntc_/var/crash mntu_/var/crash
mnta_/var/crash mntp_/var/crash disk_runp_c0t6d0 disk_ru
np_c3t1d1 disk_runp_c3t1d0 disk_runp_c0t10d0 disk_runp_c0t11d0
disk_runp_c6t1d0 disk_runp_c4t1d1 disk_runp_c4t1d0 disk_peak
disk_mean disk_rd/s disk_wr/s disk_rK/s disk_wK/s swap_avail
page_rstim freememK free_pages hme0Ipkt/s hme0Opkt/s hme0I
nKB/s hme0OuKB/s hme0IErr/s hme0OErr/s hme0Coll% hme0NoCP/s
hme0Defr/s hme1Ipkt/s hme1Opkt/s hme1InKB/s hme1OuKB/s
hme1IErr/s hme1OErr/s hme1Coll% hme1NoCP/s hme1Defr/s
hme2Ipkt/s hme2Opkt/s hme2InKB/s hme2OuKB/s hme2IErr/s hme
2OErr/s hme2Coll% hme2NoCP/s hme2Defr/s tcp_Iseg/s tcp_Oseg/s
tcp_InKB/s tcp_OuKB/s tcp_Ret% tcp_Dup% tcp_Icn/s tcp_Ocn/s
tcp_estb tcp_Rst/s tcp_Atf/s tcp_Ldrp/s tcp_LdQ0/s tcp_HOdp/s
nfs_call/s nfs_timo/s nfs_badx/s nfss_calls nfss_bad v2reads
v2writes v3reads v3writes dnlc_ref/s dnlc_hit% inod_ref/s inod_hit%
inod_stl/s pp_kernel pagesfree pageslock pagesio pages
totl
997716601 10:30:01 wwwwwwwgwww 5461758 1.2 0.7 0.02 0.05
0.06 175 0.000 0.825 39.1995 13 3
4 1987399 1164391 763387 60.401 492800 5657 487143 1.148
3009327 483716 2465425 16.402 495360 18330
477030 3.700 2508555 308481 2149903 12.548
412800 16233 396567 3.932 247503872 43925664 201993
576 17.862 6361856 58 6361798 0.001 318219264
46587592 269509656 14.738 8514208 25740 8488468
0.302 2457600 252744 2067082 10.895
552664 1450 551214 0.262 2949092
10 2654173 0.000 1474560
5 1474555 0.000 0.00000
0.00078 0.11846 0.80003
0.78442 0.05939 0.01843 1.65412 1.654
0.429 0.2 8.3 18.0 61.8 4476793
600 1502947 187868 12.961 12.182
1.136 1.935 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0.000 11.144 12.054
0.444 1.295 0.000 0.000 0.010 0.017
117 0.003 0.000 0.000 0.000 0.000
0.000 0.000 0.000 0 0 0
0 0 0 40.086 96.361 0.000
100.000 0.000 29524 187245 137002 0 50
2824
--- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> These undefined value errors and internal warnings are not a good
sign.
> Can you send a couple of lines from the input percol* files?
>
> Is the configuration file a vanilla config file?
>
> bajones at S... wrote:
> >
> > ok, this is a huge amount of output, I cut most of the error
messages
> > out at the end because they repeat....
> >
> > Script started on Thu Aug 30 16:27:54 2001
> > $ pwd
> > /usr/local/orca
> > $ /usr/local/orca/bin/orca -v -v -o /usr/local/orca/orcallator.cfg
> > Orca version 0.26beta1 using RRDs version 1.000131.
> > Loading state from
> > `/usr/local/orca/var/orca/rrd/orcallator/orca.state'.
> > Creating orca.gif.
> > Creating rrdtool.gif.
> > Finding files and setting up data structures at Thu Aug 30
16:28:17
> > 2001.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data #httpds' in plot #4 in `/usr/local/orca/var/orca/orc
> > allator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: cannot compile `sub {
#httpds }'
> > for plot #4 `data #httpds': Missing right bracket at (ev
> > al 14) line 2, at end of line
> > syntax error at (eval 14) line 2, at EOF
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data #httpds' in plot #5 in `/usr/local/orca/var/orca/orc
> > allator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data httpop/s' in plot #6 in `/usr/local/orca/var/orca/or
> > callator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data http/p5s' in plot #6 in `/usr/local/orca/var/orca/or
> > callator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: cannot compile `sub {
httpop/s }'
> > for plot #6 `data httpop/s': Bareword "httpop" not allo
> > wed while "strict subs" in use at (eval 15) line 1.
> > /usr/local/orca/bin/orca: warning: cannot compile `sub {
http/p5s }'
> > for plot #6 `data http/p5s': Bareword "http" not allowe
> > d while "strict subs" in use at (eval 16) line 1.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data %to1KB' in plot #7 in `/usr/local/orca/var/orca/orca
> > llator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data %to10KB' in plot #7 in `/usr/local/orca/var/orca/orc
> > allator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data %to100KB' in plot #7 in `/usr/local/orca/var/orca/or
> > callator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data %to1MB' in plot #7 in `/usr/local/orca/var/orca/orca
> > llator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: no substitutions performed for
> > `data %over1MB' in plot #7 in `/usr/local/orca/var/orca/or
> > callator/memdb1/percol-2001-08-13'.
> > /usr/local/orca/bin/orca: warning: cannot compile `sub { 1024 * 8
*
> > le1OuKB/s }' for plot #15 `data 1024 * 8 * le1OuKB/s': B
> > areword "le1OuKB" not allowed while "strict subs" in use at (eval
35)
> > line 1.
> > RSS VSZ %MEM TIME USER PID COMMAND
> > 4784 5552 0.2 0:01 ejones 3796 /bin/perl
> > Current running time is 0:01 minutes.
> > Loading new data from memdb1.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > /usr/local/orca/bin/orca: internal error: expecting RRD name
> > `orcallator_memdb1_dnlc_hit%' but no data loaded from `/usr/loc
> > al/orca/var/orca/orcallator/memdb1/percol-2001-08-13' at time Mon
Aug
> > 13 10:30:01 2001 (997716601).
> > /usr/local/orca/bin/orca: internal error: expecting RRD name
> > `orcallator_memdb1_dnlc_ref/s' but no data loaded from `/usr/lo
> > cal/orca/var/orca/orcallator/memdb1/percol-2001-08-13' at time Mon
> > Aug 13 10:30:01 2001 (997716601).
> >
> > these errors about the rrds not existing were the ones I was
> > originally seeing.
> >
> > --- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> > > Can you run orca with the -v -v -o command line options and send
> > them
> > > along to see what is going on?
> > >
> > > Blair
> > >
> > > bajones at S... wrote:
> > > >
> > > > --- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> > > > > Several questions:
> > > > >
> > > > > 1) Is orcallator.se running on them?
> > > >
> > > > Yes
> > > >
> > > > >
> > > > > 2) Is orcallator.se set up to start on system boot?
> > > >
> > > > Yes
> > > >
> > > > >
> > > > > 3) Are the percol* files that orcallator.se should be
> > generating in
> > > > > the proper location?
> > > >
> > > > yes, they are in the same location on both the server where
> > > > everything is working properly and the servers where they
aren't
> > > > working.
> > > >
> > > > >
> > > > > 4) What is the latest date for these files for each server?
> > > >
> > > > all the percol* files have the current time stamp.
> > > >
> > > > >
> > > > > Best,
> > > > > Blair
> > > > >
> > > > > Elizabeth Jones wrote:
> > > > > >
> > > > > > Hi - I searched around the archives for this problem but
> > > > > > I can't find this specific problem. I just installed orca
> > > > > > on a new set of SUN servers that are all running solaris
8.
> > > > > > When I run orca, only about half of the rrd files are
> > > > > > generated, so I end up with web pages in which half the
> > > > > > graphs have no data. The problem appears to be at the
> > > > > > percol* file level, which I think means that orcallator.se
> > > > > > isn't collecting this information? Does anyone have any
> > > > > > pointers on how I can figure out why this data isn't
> > > > > > being collected? some of it is what I would consider very
> > > > > > basic information, such as memory usage.
> > > > > >
> > > > > > thanks -
> > > > > > Elizabeth
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> > [Lose 20 lbs by November 5th]
> >
> >
Service.
More information about the Orca-users
mailing list