[Orca-users] Re: Half my rrds are missing
bajones at SKY.NET
bajones at SKY.NET
Fri Aug 31 05:32:12 PDT 2001
OK, we'll give it a shot. thanks!
--- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> It's not obvious what's going on.
>
> Can you upgrade to the latest orca 0.27b1 and see if it still
happens.
>
> Blair
>
> bajones at S... wrote:
> >
> > yes, vanilla. I tarred the existing orca setup that I had on
another
> > server, untarred it over on these new servers, and then ran the
same
> > configuration. I've actually done this on a bunch of servers but
> > its just this particular new group that is having these problems.
> > This is the data from one of the percol files -
> >
> > ::::::::::::::
> > percol-2001-08-13
> > ::::::::::::::
> > timestamp locltime DNnsrkcmdit uptime usr% sys% 1runq 5runq
> > 15runq #proc scanrate #proc/s #proc/p5s smtx smtx/cpu nc
> > pus mntC_/ mntU_/ mntA_/ mntP_/ mntc_/ mntu_/ mnta_/ mntp_/
mntC_/usr
> > mntU_/usr mntA_/usr mntP_/usr mntc_/usr mntu_/usr mnta
> > _/usr mntp_/usr mntC_/opt mntU_/opt mntA_/opt mntP_/opt mntc_/opt
> > mntu_/opt mnta_/opt mntp_/opt mntC_/u02 mntU_/u02 mntA_/u0
> > 2 mntP_/u02 mntc_/u02 mntu_/u02 mnta_/u02 mntp_/u02 mntC_/u01
> > mntU_/u01 mntA_/u01 mntP_/u01 mntc_/u01 mntu_/u01 mnta_/u01 mn
> > tp_/u01 mntC_/home mntU_/home mntA_/home mntP_/home mntc_/home
> > mntu_/home mnta_/home mntp_/home mntC_/var/crash mntU_/var/cr
> > ash mntA_/var/crash mntP_/var/crash mntc_/var/crash
mntu_/var/crash
> > mnta_/var/crash mntp_/var/crash disk_runp_c0t6d0 disk_ru
> > np_c3t1d1 disk_runp_c3t1d0 disk_runp_c0t10d0 disk_runp_c0t11d0
> > disk_runp_c6t1d0 disk_runp_c4t1d1 disk_runp_c4t1d0 disk_peak
> > disk_mean disk_rd/s disk_wr/s disk_rK/s disk_wK/s swap_avail
> > page_rstim freememK free_pages hme0Ipkt/s hme0Opkt/s hme0I
> > nKB/s hme0OuKB/s hme0IErr/s hme0OErr/s hme0Coll% hme0NoCP/s
> > hme0Defr/s hme1Ipkt/s hme1Opkt/s hme1InKB/s hme1OuKB/s
> > hme1IErr/s hme1OErr/s hme1Coll% hme1NoCP/s hme1Defr/s
> > hme2Ipkt/s hme2Opkt/s hme2InKB/s hme2OuKB/s hme2IErr/s hme
> > 2OErr/s hme2Coll% hme2NoCP/s hme2Defr/s tcp_Iseg/s tcp_Oseg/s
> > tcp_InKB/s tcp_OuKB/s tcp_Ret% tcp_Dup% tcp_Icn/s tcp_Ocn/s
> > tcp_estb tcp_Rst/s tcp_Atf/s tcp_Ldrp/s tcp_LdQ0/s tcp_HOdp/s
> > nfs_call/s nfs_timo/s nfs_badx/s nfss_calls nfss_bad v2reads
> > v2writes v3reads v3writes dnlc_ref/s dnlc_hit% inod_ref/s
inod_hit%
> > inod_stl/s pp_kernel pagesfree pageslock pagesio pages
> > totl
> > 997716601 10:30:01 wwwwwwwgwww 5461758 1.2 0.7 0.02 0.05
> > 0.06 175 0.000 0.825 39.1995 13 3
> > 4 1987399 1164391 763387 60.401 492800 5657 487143 1.148
> > 3009327 483716 2465425 16.402 495360 18330
> > 477030 3.700 2508555 308481 2149903 12.548
> > 412800 16233 396567 3.932 247503872 43925664 201993
> > 576 17.862 6361856 58 6361798 0.001 318219264
> > 46587592 269509656 14.738 8514208 25740 8488468
> > 0.302 2457600 252744 2067082 10.895
> > 552664 1450 551214 0.262 2949092
> > 10 2654173 0.000 1474560
> > 5 1474555 0.000 0.00000
> > 0.00078 0.11846 0.80003
> > 0.78442 0.05939 0.01843 1.65412
1.654
> > 0.429 0.2 8.3 18.0 61.8 4476793
> > 600 1502947 187868 12.961 12.182
> > 1.136 1.935 0.000 0.000 0.000
> > 0.000 0.000 0.000 0.000 0.000 0.000
> > 0.000 0.000 0.000 0.000 0.000
> > 0.000 0.000 0.000 0.000 0.000
> > 0.000 0.000 0.000 0.000 11.144 12.054
> > 0.444 1.295 0.000 0.000 0.010 0.017
> > 117 0.003 0.000 0.000 0.000 0.000
> > 0.000 0.000 0.000 0 0 0
> > 0 0 0 40.086 96.361 0.000
> > 100.000 0.000 29524 187245 137002 0 50
> > 2824
> >
> > --- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> > > These undefined value errors and internal warnings are not a
good
> > sign.
> > > Can you send a couple of lines from the input percol* files?
> > >
> > > Is the configuration file a vanilla config file?
> > >
> > > bajones at S... wrote:
> > > >
> > > > ok, this is a huge amount of output, I cut most of the error
> > messages
> > > > out at the end because they repeat....
> > > >
> > > > Script started on Thu Aug 30 16:27:54 2001
> > > > $ pwd
> > > > /usr/local/orca
> > > > $ /usr/local/orca/bin/orca -v -v -o
/usr/local/orca/orcallator.cfg
> > > > Orca version 0.26beta1 using RRDs version 1.000131.
> > > > Loading state from
> > > > `/usr/local/orca/var/orca/rrd/orcallator/orca.state'.
> > > > Creating orca.gif.
> > > > Creating rrdtool.gif.
> > > > Finding files and setting up data structures at Thu Aug 30
> > 16:28:17
> > > > 2001.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data #httpds' in plot #4 in `/usr/local/orca/var/orca/orc
> > > > allator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: cannot compile `sub {
> > #httpds }'
> > > > for plot #4 `data #httpds': Missing right bracket at (ev
> > > > al 14) line 2, at end of line
> > > > syntax error at (eval 14) line 2, at EOF
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data #httpds' in plot #5 in `/usr/local/orca/var/orca/orc
> > > > allator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data httpop/s' in plot #6 in `/usr/local/orca/var/orca/or
> > > > callator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data http/p5s' in plot #6 in `/usr/local/orca/var/orca/or
> > > > callator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: cannot compile `sub {
> > httpop/s }'
> > > > for plot #6 `data httpop/s': Bareword "httpop" not allo
> > > > wed while "strict subs" in use at (eval 15) line 1.
> > > > /usr/local/orca/bin/orca: warning: cannot compile `sub {
> > http/p5s }'
> > > > for plot #6 `data http/p5s': Bareword "http" not allowe
> > > > d while "strict subs" in use at (eval 16) line 1.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data %to1KB' in plot #7 in `/usr/local/orca/var/orca/orca
> > > > llator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data %to10KB' in plot #7 in `/usr/local/orca/var/orca/orc
> > > > allator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data %to100KB' in plot #7 in `/usr/local/orca/var/orca/or
> > > > callator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data %to1MB' in plot #7 in `/usr/local/orca/var/orca/orca
> > > > llator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: no substitutions performed
for
> > > > `data %over1MB' in plot #7 in `/usr/local/orca/var/orca/or
> > > > callator/memdb1/percol-2001-08-13'.
> > > > /usr/local/orca/bin/orca: warning: cannot compile `sub { 1024
* 8
> > *
> > > > le1OuKB/s }' for plot #15 `data 1024 * 8 * le1OuKB/s': B
> > > > areword "le1OuKB" not allowed while "strict subs" in use at
(eval
> > 35)
> > > > line 1.
> > > > RSS VSZ %MEM TIME USER PID COMMAND
> > > > 4784 5552 0.2 0:01 ejones 3796 /bin/perl
> > > > Current running time is 0:01 minutes.
> > > > Loading new data from memdb1.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > Use of uninitialized value at (eval 171) line 3, <FD> chunk 2.
> > > > /usr/local/orca/bin/orca: internal error: expecting RRD name
> > > > `orcallator_memdb1_dnlc_hit%' but no data loaded from
`/usr/loc
> > > > al/orca/var/orca/orcallator/memdb1/percol-2001-08-13' at time
Mon
> > Aug
> > > > 13 10:30:01 2001 (997716601).
> > > > /usr/local/orca/bin/orca: internal error: expecting RRD name
> > > > `orcallator_memdb1_dnlc_ref/s' but no data loaded from
`/usr/lo
> > > > cal/orca/var/orca/orcallator/memdb1/percol-2001-08-13' at time
Mon
> > > > Aug 13 10:30:01 2001 (997716601).
> > > >
> > > > these errors about the rrds not existing were the ones I was
> > > > originally seeing.
> > > >
> > > > --- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> > > > > Can you run orca with the -v -v -o command line options and
send
> > > > them
> > > > > along to see what is going on?
> > > > >
> > > > > Blair
> > > > >
> > > > > bajones at S... wrote:
> > > > > >
> > > > > > --- In orca-users at y..., Blair Zajac <blair at o...> wrote:
> > > > > > > Several questions:
> > > > > > >
> > > > > > > 1) Is orcallator.se running on them?
> > > > > >
> > > > > > Yes
> > > > > >
> > > > > > >
> > > > > > > 2) Is orcallator.se set up to start on system boot?
> > > > > >
> > > > > > Yes
> > > > > >
> > > > > > >
> > > > > > > 3) Are the percol* files that orcallator.se should be
> > > > generating in
> > > > > > > the proper location?
> > > > > >
> > > > > > yes, they are in the same location on both the server
where
> > > > > > everything is working properly and the servers where they
> > aren't
> > > > > > working.
> > > > > >
> > > > > > >
> > > > > > > 4) What is the latest date for these files for each
server?
> > > > > >
> > > > > > all the percol* files have the current time stamp.
> > > > > >
> > > > > > >
> > > > > > > Best,
> > > > > > > Blair
> > > > > > >
> > > > > > > Elizabeth Jones wrote:
> > > > > > > >
> > > > > > > > Hi - I searched around the archives for this problem
but
> > > > > > > > I can't find this specific problem. I just installed
orca
> > > > > > > > on a new set of SUN servers that are all running
solaris
> > 8.
> > > > > > > > When I run orca, only about half of the rrd files are
> > > > > > > > generated, so I end up with web pages in which half
the
> > > > > > > > graphs have no data. The problem appears to be at the
> > > > > > > > percol* file level, which I think means that
orcallator.se
> > > > > > > > isn't collecting this information? Does anyone have
any
> > > > > > > > pointers on how I can figure out why this data isn't
> > > > > > > > being collected? some of it is what I would consider
very
> > > > > > > > basic information, such as memory usage.
> > > > > > > >
> > > > > > > > thanks -
> > > > > > > > Elizabeth
> > > >
> > > > Yahoo! Groups Sponsor
> > > > ADVERTISEMENT
> > > > [Lose 20 lbs by November 5th]
> > > >
> > > >
> > Service.
> >
> > Yahoo! Groups Sponsor
> > [Image]
> >
> >
Service.
More information about the Orca-users
mailing list