[Orca-users] Re: Install problems with orca-0.27b1 on solaris 8

[Chandrasekhar Nagasundaram - SunPS]

> I have gcc, gmake, cc, and make installed in my Solaris 8 machine.
> My version of gcc is 2.95.2
> I use gmake after running configure. Then when I do a 'gmake
> test_modules' the
> make dies. It gets to 'rrdtool-1.0.33/perl-shared' and dies there.
>
> I'm enclosing the output from the make. Using 'make' from the Solaris 8
> distribution there doesn't work either. Should I explicitly set any LD_*
> paths?
> Also, the Makefile in the 'perl-shared' directory seems to pick the
> /usr/ccs/bin/cc
> compiler instead. I did try chaning that to gcc with no luck.
>
> Any help or pointers is appreciated. Please send me mail at
> 'sekhar.nagasundaram at sun.com'
>
> Thanks much,
>
> Sekhar
>
>   ------------------------------------------------------------------------
> cd packages && gmake CFLAGS="-g -O2" test_modules
> gmake[1]: Entering directory `/opt/orca-0.27b1/packages'
> cd rrdtool-1.0.33 && gmake CFLAGS="-g -O2"
> gmake[2]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> Making all in cgilib-0.4
> gmake[3]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/cgilib-0.4'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/cgilib-0.4'
> Making all in config
> gmake[3]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/config'
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/config'
> Making all in gd1.3
> gmake[3]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/gd1.3'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/gd1.3'
> Making all in zlib-1.1.3
> gmake[3]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/zlib-1.1.3'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/zlib-1.1.3'
> Making all in libpng-1.0.9
> gmake[3]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/libpng-1.0.9'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/libpng-1.0.9'
> Making all in src
> gmake[3]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/src'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/src'
> Making all in doc
> gmake[3]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/doc'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/doc'
> Making all in examples
> gmake[3]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/examples'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/examples'
> Making all in contrib
> gmake[3]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> Making all in trytime
> gmake[4]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib/trytime'
> gmake[4]: Nothing to be done for `all'.
> gmake[4]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib/trytime'
> gmake[4]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> gmake[4]: Nothing to be done for `all-am'.
> gmake[4]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> Making all in tcl
> gmake[3]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/tcl'
> gmake[3]: Nothing to be done for `all'.
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33/tcl'
> gmake[3]: Entering directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> cd perl-piped && gmake
> gmake[4]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-piped'
> gmake[4]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-piped'
> cd perl-shared && gmake
> gmake[4]: Entering directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-shared'
> gcc -c -I../src -I../gd1.3  -xO3 -xdepend    -DVERSION=\"1.000331\"
-DXS_VERSION=\"1.000331\" -KPIC -I/usr/perl5/5.00503/sun4-solaris/CORE
-DPERLPATCHLEVEL=5 RRDs.c
> gcc: unrecognized option `-KPIC'
> gcc: language depend not recognized
> gcc: RRDs.c: linker input file unused since linking not done
> Running Mkbootstrap for RRDs ()
> chmod 644 RRDs.bs
> LD_RUN_PATH="" cc -o blib/arch/auto/RRDs/RRDs.so  -G RRDs.o -L../src/.libs/
-lrrd_private -lm
> ld: fatal: file RRDs.o: cannot open file: No such file or directory
> ld: fatal: File processing errors. No output written to
blib/arch/auto/RRDs/RRDs.so
> gmake[4]: *** [blib/arch/auto/RRDs/RRDs.so] Error 1
> gmake[4]: Leaving directory
`/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-shared'
> gmake[3]: *** [perl_shared] Error 2
> gmake[3]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> gmake[2]: *** [all-recursive] Error 1
> gmake[2]: Leaving directory `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> gmake[1]: *** [make_rrdtool] Error 2
> gmake[1]: Leaving directory `/opt/orca-0.27b1/packages'
> gmake: *** [test_modules] Error 2

------------- End Forwarded Message -------------



***************************************************************
     /\
    \\ \         Sekhar Nagasundaram
   \ \\ /        Project Engineer
  / \/ / /       Sun Professional Services
/ /   \//\      901 San Antonio Road, USCA28-11
\//\   / /      Palo Alto, CA   94303-4900
  / / /\ /       Voicemail: 408-276-9369
   / \\ \        Email    : sekhar.nagasundaram at sun.com
    \ \\         Fax      : 408-276-9511
     \/          Pager    : 1(800)854-6079
    
***************************************************************