[Orca-users] Re: Install problems with orca-0.27b1 on solaris 8
snagasun at yahoo.com
snagasun at yahoo.com
Tue Jun 12 14:03:53 PDT 2001
make CC=cc did not work and threw up a whole slew of compilation
errors. I'm downloading perl5.6.1 from sunfreeware.com and am
going to run that and see if that works. I believe that perl
version was compiled using gcc.
thanks
- sekhar
--- In orca-users at y..., Blair Zajac <blair at g...> wrote:
> It looks like gcc is being passed an argument '-xdepend' that is
meant
> for Solaris' cc compiler.
>
> I would cd into packages/rrdtool-1.0.33/perl-shared and run
>
> make CC=cc
>
> and try that.
>
> If this happens a lot, you may want to rebuild Perl with gcc instead
> and next time you run 'make Makefile.PL' it should work.
>
> Regards,
> Blair
>
> Chandrasekhar Nagasundaram - SunPS wrote:
> >
> > > I have gcc, gmake, cc, and make installed in my Solaris 8
machine.
> > > My version of gcc is 2.95.2
> > > I use gmake after running configure. Then when I do a 'gmake
> > > test_modules' the
> > > make dies. It gets to 'rrdtool-1.0.33/perl-shared' and dies
there.
> > >
> > > I'm enclosing the output from the make. Using 'make' from the
> > Solaris 8
> > > distribution there doesn't work either. Should I explicitly set
any
> > LD_*
> > > paths?
> > > Also, the Makefile in the 'perl-shared' directory seems to pick
the
> > > /usr/ccs/bin/cc
> > > compiler instead. I did try chaning that to gcc with no luck.
> > >
> > > Any help or pointers is appreciated. Please send me mail at
> > > 'sekhar.nagasundaram at s...'
> > >
> > > Thanks much,
> > >
> > > Sekhar
> > >
> > >
> >
------------------------------------------------------------------------
> > > cd packages && gmake CFLAGS="-g -O2" test_modules
> > > gmake[1]: Entering directory `/opt/orca-0.27b1/packages'
> > > cd rrdtool-1.0.33 && gmake CFLAGS="-g -O2"
> > > gmake[2]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> > > Making all in cgilib-0.4
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/cgilib-0.4'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/cgilib-0.4'
> > > Making all in config
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/config'
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/config'
> > > Making all in gd1.3
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/gd1.3'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/gd1.3'
> > > Making all in zlib-1.1.3
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/zlib-1.1.3'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/zlib-1.1.3'
> > > Making all in libpng-1.0.9
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/libpng-1.0.9'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/libpng-1.0.9'
> > > Making all in src
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/src'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/src'
> > > Making all in doc
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/doc'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/doc'
> > > Making all in examples
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/examples'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/examples'
> > > Making all in contrib
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> > > Making all in trytime
> > > gmake[4]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib/trytime'
> > > gmake[4]: Nothing to be done for `all'.
> > > gmake[4]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib/trytime'
> > > gmake[4]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> > > gmake[4]: Nothing to be done for `all-am'.
> > > gmake[4]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/contrib'
> > > Making all in tcl
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/tcl'
> > > gmake[3]: Nothing to be done for `all'.
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/tcl'
> > > gmake[3]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> > > cd perl-piped && gmake
> > > gmake[4]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-piped'
> > > gmake[4]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-piped'
> > > cd perl-shared && gmake
> > > gmake[4]: Entering directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-shared'
> > > gcc -c -I../src -I../gd1.3 -xO3 -xdepend
-DVERSION=\"1.000331\"
> > -DXS_VERSION=\"1.000331\" -KPIC
-I/usr/perl5/5.00503/sun4-solaris/CORE
> >
> > -DPERLPATCHLEVEL=5 RRDs.c
> > > gcc: unrecognized option `-KPIC'
> > > gcc: language depend not recognized
> > > gcc: RRDs.c: linker input file unused since linking not done
> > > Running Mkbootstrap for RRDs ()
> > > chmod 644 RRDs.bs
> > > LD_RUN_PATH="" cc -o blib/arch/auto/RRDs/RRDs.so -G RRDs.o
> > -L../src/.libs/
> > -lrrd_private -lm
> > > ld: fatal: file RRDs.o: cannot open file: No such file or
directory
> > > ld: fatal: File processing errors. No output written to
> > blib/arch/auto/RRDs/RRDs.so
> > > gmake[4]: *** [blib/arch/auto/RRDs/RRDs.so] Error 1
> > > gmake[4]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33/perl-shared'
> > > gmake[3]: *** [perl_shared] Error 2
> > > gmake[3]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> > > gmake[2]: *** [all-recursive] Error 1
> > > gmake[2]: Leaving directory
> > `/opt/orca-0.27b1/packages/rrdtool-1.0.33'
> > > gmake[1]: *** [make_rrdtool] Error 2
> > > gmake[1]: Leaving directory `/opt/orca-0.27b1/packages'
> > > gmake: *** [test_modules] Error 2
> >
> > ------------- End Forwarded Message -------------
> >
> > ***************************************************************
> > /\
> > \\ \ Sekhar Nagasundaram
> > \ \\ / Project Engineer
> > / \/ / / Sun Professional Services
> > / / \//\ 901 San Antonio Road, USCA28-11
> > \//\ / / Palo Alto, CA 94303-4900
> > / / /\ / Voicemail: 408-276-9369
> > / \\ \ Email : sekhar.nagasundaram at s...
> > \ \\ Fax : 408-276-9511
> > \/ Pager : 1(800)854-6079
> >
> > ***************************************************************
> >
> > Yahoo! Groups Sponsor
> >
> >
> >
Service.
More information about the Orca-users
mailing list