[Orca-users] Re: no stats for ge0

[Blair Zajac]

James,

Can you send me the fixed kstat.se directly as an attachment and
I'll put it up on the Orca web site for people to download?

Regards,
Blair

karl.rossing at federated.ca wrote:
> 
> netstat -i gives information.
> 
> So, i guess i;ll contact Richard to see where if he can send me a
> gziped
> copy of the file since the attachment has been word wrapped(stupid
> notes).
> 
> Thanks
> 
> Karl
> 
> James Kanyok <james.kanyok at lmco.com>
> Sent by: kanyok@[144.219.14.181]
> 05/24/2001 09:21 AM
> Please respond to orca-users
> 
>         To:     orca-users at yahoogroups.com
>         cc:
>         Subject:        Re: [orca-users] Re: no stats for ge0
> 
> I had this same problem.  I narrowed it down to a problem with the
> SEToolkit.  I worked with Richard Pettit of Quest Software and he came
> up
> with a fix last week for the kstat.se file.
> 
> To see if this is the same problem do a "netstat -i"  which should
> show
> correct stats.  Then do "se net.se" from the SEtoolkit.  If the stats
> are
> zero, you are seeing the same problem I was.
> 
> Don't know if he officially has put the fix out but here it is.
> 
> Jamie
> 
> ------------------------------------------------------------------------
> Subject: Re: [orca-users] Re: no stats for ge0
> References: <OF0112EACE.9826305B-ON86256A55.00153E55 at f...>
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
> From: Blair Zajac <blair at g...>
> 
> Than its an SE or orcallator.se issue.  I don't have a ge card, so I
> won't be able to help.  An email to the SE mailing list at
> 
> se-feedback at s...
> 
> may be appropriate.
> 
> Regards,
> Blair
> 
> karl.rossing at f... wrote:
> >
> > The columns are there, but all the entries are set to 0
> >
> > Karl
> >
> > Blair Zajac <blair at g...>
> > 05/22/2001 05:44 PM
> > Please respond to orca-users
> >
> >         To:     orca-users at yahoogroups.com
> >         cc:
> >         Subject:        Re: [orca-users] Re: no stats for ge0
> >
> > You'll have to check the output percol-* files.  Use the
> > orcallator_column.pl script to check the files to see if
> > there's any data there.  You can run it like
> >
> > zcat percol-2001.... | orcallator_column -c ge0
> >
> > and see what's there.  If the data is there, then its an
> > orcallator.cfg issue, otherwise its a SE/orcallator issue.
> >
> > Regards,
> > Blair
> >
> > karl.rossing at f... wrote:
> > >
> > > I'm running orca0.27b1 with setoolkit 3.2 and i'm still not
> getting
> > > any
> > > ge0 stats.
> > >
> > > Could it be that the setoolkit is not logging my gigabit info?
> > >
> > > Karl Rossing
> > > 05/07/2001 10:55 AM
> > >
> > >         To:     orca-users at yahoogroups.com
> > >         cc:
> > >         Subject:        no stats for ge0
> > >
> > > Hi,
> > >
> > > I don't seem to be getting any stats for ge0 or hme0. The graphs
> > come
> > > up
> > > blank.
> > >
> > > I'm using setoolkit 3.2. I understand from looking through the
> > > archives
> > > that  se 3.1 needed 2 small "patches" to get it to log ge0 stats.
> > I'm
> > > guessing that version 3.2 does not need the patch.
> > >
> > > Everything else seems to work fine.
> > >
> > > Karl