[Orca-users] setoolkit on solaris 8

[Oliver.Walter at boschrexroth.de]

Hallo Orca users,

i`ll try to run setoolkit on solaris 8 with orcallator.se:

export PATH=$PATH:/opt/RICHPse/bin
export
SEPATH=/opt/RICHPse/examples:/opt/RICHPse/toptool:/opt/RICHPse/orcallator

se  -DWATCH_OS -DWATCH_WEB orcallator.se 10 &

after 5 secs i get:

root at bridge19:/opt/RICHPse#
[1]+  Segmentation Fault      se -DWATCH_OS -DWATCH_WEB orcallator.se 10
root at bridge19:/opt/RICHPse#

setoolkit is running zoom.se without any probs.

a truss  gives the following output:
... 1000 lines ...

ioctl(8, KSTAT_IOC_READ, "")                    = 16001
ioctl(8, KSTAT_IOC_READ, "ssd0")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd1")                = 16001
ioctl(8, KSTAT_IOC_READ, "sd6")                 = 16001
ioctl(8, KSTAT_IOC_READ, "ssd2")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd3")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd4")                = 16001
ioctl(8, KSTAT_IOC_READ, "ssd5")                = 16001
ioctl(8, KSTAT_IOC_READ, "1/md101")             = 16001
ioctl(8, KSTAT_IOC_READ, "1/md102")             = 16001
ioctl(8, KSTAT_IOC_READ, "1/md100")             = 16001
close(8)                                        = 0
    Incurred fault #6, FLTBOUNDS  %pc = 0xFFFFFFFF7E63BFB4
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
    Received signal #11, SIGSEGV [default]
      siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000
        *** process killed ***

we have a SUN T3 Storage via FCAL connected to maschine with vxfs
and the maschine is running with SUN Cluster 3.0 Software.

Does anybody have an idea to fix this? Maybe a specific patch?

regards

Oliver Walter

Zentrale Informationsverarbeitung
Bosch Rexroth AG
The Drive & Control Company
Sandweg 45
D-97737 Gemünden-Langenprozelten
telefone: +49(0)9352-18-1862
mailto:oliver.walter at boschrexroth.de
http://www.boschrexroth.com