[Orca-users] Installing Orca Snapshot version on Linux 64bit RHE3

[csarid]

Thanks to all who responded.  At this time, this tool is not suitable for use with my distribution. I will look for an alternative solution and check back periodically to check and see if the compile issues have been overcome. 
   
  Very Best Regards!
   
  

csarid <csarid at yahoo.com> wrote:
    A quick update:
   
  I installed: perl-Digest-MD5-M4p-0.01-1.1.el3.rf.rpm (el3-i386)

  But still had the same error messages. Are their any other modules to update.
   
  The only thing here is that my system is a x86-64 machine 
   
  Thanks


    Ok.. I updgraded to the latest perl version: 
  This is perl, v5.8.0 built for x86_64-linux-thread-multi

  Things seemed to "make" correctly except for the following error:
   
  
make[5]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50'
make[4]: Nothing to be done for `all'.
make[4]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50/tcl'
make[4]: Entering directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50'
test -r perl-piped/Makefile.PL.in \
  || ln -s ./perl-piped/Makefile.PL.in perl-piped/Makefile.PL.in
test -r perl-piped/RRDp.pm \
  || ln -s ./perl-piped/RRDp.pm perl-piped/RRDp.pm
cd perl-piped && /usr/bin/perl Makefile.PL
Writing Makefile for RRDp
cd perl-piped && make
make[5]: Entering directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50/perl-piped'
Manifying blib/man3/RRDp.3pm
make[5]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50/perl-piped'
test -r perl-shared/Makefile.PL.in \
  || ln -s ./perl-shared/Makefile.PL.in perl-shared/Makefile.PL.in
test -r perl-shared/RRDs.pm \
  || ln -s ./perl-shared/RRDs.pm perl-shared/RRDs.pm
test -r perl-shared/RRDs.xs \
  || ln -s ./perl-shared/RRDs.xs perl-shared/RRDs.xs
cd perl-shared && /usr/bin/perl Makefile.PL
Writing Makefile for RRDs
cd perl-shared && make
make[5]: Entering directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50/perl-shared'
gcc -c  -I.. -I../src -I../gd1.3 -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -DHAVE_CONFIG_H -O2 -g -pipe   -DVERSIonfiltered=\"1.000503\" -DXS_VERSIonfiltered=\"1.000503\" -fPIC "-I/usr/lib64/perl5/5.8.0/x86_64-linux-thread-multi/CORE"  -DPERLPATCHLEVEL=8 RRDs.c
Running Mkbootstrap for RRDs ()
chmod 644 RRDs.bs
rm -f blib/arch/auto/RRDs/RRDs.so
gcc  -shared RRDs.o -L../src/.libs/ -lrrd_private   -lm -o blib/arch/auto/RRDs/RRDs.so
/usr/bin/ld: ../src/.libs//librrd_private.a(parsetime.o): relocation R_X86_64_32 can not be used when making a shared object; recompile with -fPIC
../src/.libs//librrd_private.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[5]: *** [blib/arch/auto/RRDs/RRDs.so] Error 1
make[5]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50/perl-shared'
make[4]: *** [perl_shared] Error 2
make[4]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages/rrdtool-1.0.50'
make[1]: *** [make_rrdtool] Error 2
make[1]: Leaving directory `/tmp/orca/orca-snapshot-r529/packages'
make: *** [all] Error 1

   
  If this is still a perl module library update that's required, can you point me to the location of the files
   
  Thanks!


Blair Zajac <blair at orcaware.com> wrote:
  csarid wrote:
> Hello,
> 
> I am in the process of installing the Orca-Snapshot version and I was 
> able to configure just fine.By way, the documentation in this version is 
> much better.
> 
> The configure work correctly. However, the make is erroring out. Please 
> note that I'm trying to configure and make on RedHat3 on a EMT64 intel 
> Xeon running 64bit OS.

Hello,

As I said in my previous note, I recommend getting the latest CPAN modules and 
using them instead of the modules that come with Orca. These hopefully will 
work for you.

Regards,
Blair



Blair Zajac <blair at orcaware.com> wrote:  csarid wrote:
> Hello,
> 
> I am in the process of installing the Orca-Snapshot version and I was 
> able to configure just fine.By way, the documentation in this version is 
> much better.
> 
> The configure work correctly. However, the make is erroring out. Please 
> note that I'm trying to configure and make on RedHat3 on a EMT64 intel 
> Xeon running 64bit OS.

Hello,

As I said in my previous note, I recommend getting the latest CPAN modules and 
using them instead of the modules that come with Orca. These hopefully will 
work for you.

Regards,
Blair


    
---------------------------------
  See the all-new, redesigned Yahoo.com. Check it out. _______________________________________________
Orca-users mailing list
Orca-users at orcaware.com
http://www.orcaware.com/mailman/listinfo/orca-users


 				
---------------------------------
Want to be your own boss? Learn how on  Yahoo! Small Business. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </pipermail/orca-users/attachments/20060803/7f222cc9/attachment.html>