[Orca-users] Installing orca on Solaris 10
Ayotunde Itayemi
aitayemi at vmobile-nigeria.com
Fri Feb 17 06:02:47 PST 2006
Hi,
after editing 2 or so files in the packages/rrdtool-1.0.50 and setting "
-ar" to " -cr" the compile went a little further
and then terminated with the following error. Note that /usr/ccs/bin in
in my PATH variable.
#make
....
Writing Makefile for RRDs
cd perl-shared && make
make[5]: Entering directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50/perl-shared'
cp RRDs.pm blib/lib/RRDs.pm
cp ntmake.pl blib/lib/ntmake.pl
/usr/local/bin/perl /usr/local/lib/perl5/5.8.7/ExtUtils/xsubpp -typemap
/usr/local/lib/perl5/5.8.7/ExtUtils/typemap RRDs.xs > RRDs.xsc && mv
RRDs.xsc RRDs.c
gcc -c -I.. -I../src -I../gd1.3 -fno-strict-aliasing -pipe
-I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
-DHAVE_CONFIG_H -O -DVERSION=\"1.000503\" -DXS_VERSION=\"1.000503\"
-fPIC "-I/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE"
-DPERLPATCHLEVEL=8 RRDs.c
In file included from /usr/include/sys/signal.h:34,
from /usr/include/signal.h:26,
from
/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE/unixish.h:106,
from
/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE/perl.h:2220,
from RRDs.xs:6:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/signal.h:26,
from
/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE/unixish.h:106,
from
/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE/perl.h:2220,
from RRDs.xs:6:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from
/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE/unixish.h:106,
from
/usr/local/lib/perl5/5.8.7/sun4-solaris/CORE/perl.h:2220,
from RRDs.xs:6:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
make[5]: *** [RRDs.o] Error 1
make[5]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50/perl-shared'
make[4]: *** [perl_shared] Error 2
make[4]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50'
make[1]: *** [make_rrdtool] Error 2
make[1]: Leaving directory `/orcafiles/orca-snapshot-r525/packages'
make: *** [all] Error 1
bash-3.00#
________________________________
From: orca-users-bounces+aitayemi=vmobile-nigeria.com at orcaware.com
[mailto:orca-users-bounces+aitayemi=vmobile-nigeria.com at orcaware.com] On
Behalf Of Ayotunde Itayemi
Sent: 16 February 2006 19:57
To: orca-users at orcaware.com
Subject: FW: [Orca-users] Installing orca on Solaris 10
I still dont have a solution please. same errors - the make did not
succeed.
________________________________
From: Mike.Kent at indystar.com [mailto:Mike.Kent at indystar.com]
Sent: 16 February 2006 17:49
To: Ayotunde Itayemi
Subject: RE: [Orca-users] Installing orca on Solaris 10
You're welcome.
"Ayotunde Itayemi" <aitayemi at vmobile-nigeria.com>
02/16/2006 05:55 AM
To
<Mike.Kent at indystar.com>
cc
<orca-users at orcaware.com>
Subject
RE: [Orca-users] Installing orca on Solaris 10
I got the following error from make with snapshot orca-snapshot-r525.
At first I got some complaints about missing automake and m4 along with
the error below, but those vanished after I installed the packages.
Thanks.
#make
...
cd . && /bin/bash ./config.status config.h
config.status: creating config.h
config.status: config.h is unchanged
make all-recursive
make[3]: Entering directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50'
Making all in cgilib-0.4
make[4]: Entering directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50/cgilib-0.4'
if /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I.
-I. -I.. -g -O2 -MT cgi.lo -MD -MP -MF ".deps/cgi.Tpo" -c -o cgi.lo
cgi.c; \
then mv -f ".deps/cgi.Tpo" ".deps/cgi.Plo"; else rm -f ".deps/cgi.Tpo";
exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -MT cgi.lo -MD -MP -MF
.deps/cgi.Tpo -c cgi.c -o cgi.o
/bin/bash ../libtool --tag=CC --mode=link gcc -g -O2 -o librrd_cgi.la
cgi.lo -lm
mkdir .libs
false cru .libs/librrd_cgi.a cgi.o
make[4]: *** [librrd_cgi.la] Error 1
make[4]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50/cgilib-0.4'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50'
make[2]: *** [all] Error 2
make[2]: Leaving directory
`/orcafiles/orca-snapshot-r525/packages/rrdtool-1.0.50'
make[1]: *** [make_rrdtool] Error 2
make[1]: Leaving directory `/orcafiles/orca-snapshot-r525/packages'
make: *** [all] Error 1
bash-3.00# which make
/usr/local/bin/make
bash-3.00#
________________________________
From: Mike.Kent at indystar.com [mailto:Mike.Kent at indystar.com]
Sent: 15 February 2006 20:16
To: Ayotunde Itayemi
Cc: orca-users at orcaware.com;
orca-users-bounces+mike.kent=indystar.com at orcaware.com
Subject: Re: [Orca-users] Installing orca on Solaris 10
Try the latest version at http://www.orcaware.com/orca/pub/snapshots/
"Ayotunde Itayemi" <aitayemi at vmobile-nigeria.com>
Sent by: orca-users-bounces+mike.kent=indystar.com at orcaware.com
02/15/2006 02:11 PM
To
<orca-users at orcaware.com>
cc
Subject
[Orca-users] Installing orca on Solaris 10
Hi All,
I am trying to set up Orca on a Solaris 10 sparc box but getting all
sorts of errors.
Solaris 10
Orca-0.27
SE Tools v 3.4 (RICHPse)
Gcc 3.3.2
I have tried the default Solaris "make" and also GNU make 3.80 Also
tried the default Solaris perl 5.8.4 and the GNU perl 5.8.7 with no luck
I compile orca with:
#./configure --with-html-dir=/var/apache2/htdocs/orca --with-ncsa-log
=/var/apache2/logs/access_log #make
...
Checking if your kit is complete...
Looks good
Writing Makefile for Math::Interpolate
cd Math-Interpolate-1.05 && make OPTIMIZE="-g -O2"
make[2]: Entering directory
`/orcafiles/orca-0.27/packages/Math-Interpolate-1.05'
cp lib/Math/IntervalSearch.pm blib/lib/Math/IntervalSearch.pm cp
lib/Math/Interpolate.pm blib/lib/Math/Interpolate.pm Manifying
blib/man3/Math::IntervalSearch.3 Manifying blib/man3/Math::Interpolate.3
make[2]: Leaving directory
`/orcafiles/orca-0.27/packages/Math-Interpolate-1.05'
cd rrdtool-1.0.40 && ./configure
--with-html-dir=/var/apache2/htdocs/orca
--with-ncsa-log=/var/apache2/logs/access_log
--cache-file=../../config.cache loading cache ../../config.cache
checking host system type... sparc-sun-solaris2.10 checking target
system type... sparc-sun-solaris2.10 checking build system type...
sparc-sun-solaris2.10 checking for a BSD compatible install...
config/install-sh -c checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes checking for working
aclocal... missing checking for working autoconf... missing checking for
working automake... missing checking for working autoheader... missing
checking for working makeinfo... missing checking for perl...
/usr/local/bin/perl checking for shared library extension... so checking
for the C compiler perl wants to use to build its modules...
./configure: test: unknown operator -B/usr/ccs/bin/
make[1]: *** [rrdtool-1.0.40/config.status] Error 1
make[1]: Leaving directory `/orcafiles/orca-0.27/packages'
make: *** [all] Error 1
bash-3.00#
So I then created a link called cc to gcc to see what would happen.
I still get the same error running make again.
Any ideas please? Thank you.
Ayotunde Itayemi | Business Systems | IS-SYSTEMS | IS Group |
08022225919 | Vmobile Nigeria | http://itayemi.tripod.com/
________________________________________________________________________
_______________________________________________________________________
"The only people to get even with are those who have helped you."
"Men ought to throw caution to the winds, and catch it on the
rebound..."
_______________________________________________
Orca-users mailing list
Orca-users at orcaware.com
http://www.orcaware.com/mailman/listinfo/orca-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </pipermail/orca-users/attachments/20060217/fef5002f/attachment.html>
More information about the Orca-users
mailing list