[Orca-users] New errors

[Normandin, Mike]

I suggest  upgrading to the latest build 3.5.0.  I believe there was a
hard coded limit of 8 NICs in that release.

 http://sourceforge.net/projects/setoolkit

	Mike 

-----Original Message-----
From: KHo at skylinenet.net [mailto:KHo at skylinenet.net] 
Sent: Wednesday, December 24, 2008 12:42 PM
To: Normandin, Mike; orca-users at orcaware.com
Subject: RE: [Orca-users] New errors

Thanks for your reply.

I'm using orca version 0.27 and output of ifconfig is below.

sun16176 ~ 1 > ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
        inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index
2
        inet 161.58.80.70 netmask fffffff0 broadcast 161.58.80.79
        groupname primary
bge0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 161.58.82.121 netmask fffffffc broadcast 161.58.82.123
bge0:2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 161.58.82.122 netmask fffffffc broadcast 161.58.82.123
bge0:3: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 10.0.70.100 netmask fffff000 broadcast 10.0.79.255
bge0:4: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 10.0.70.101 netmask fffff000 broadcast 10.0.79.255
bge0:5: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 10.0.70.102 netmask fffff000 broadcast 10.0.79.255
bge0:6: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 10.0.70.103 netmask fffff000 broadcast 10.0.79.255
bge0:7: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 2
        inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
ce0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
        groupname primary


________________________________________
From: orca-users-bounces+kho=skylinenet.net at orcaware.com
[orca-users-bounces+kho=skylinenet.net at orcaware.com] On Behalf Of
Normandin, Mike [mike.normandin at credit-suisse.com]
Sent: Wednesday, December 24, 2008 10:31 AM
To: Khanh Ho; orca-users at orcaware.com
Subject: Re: [Orca-users] New errors

That's the network interfaces array. What does ifconfig -a display ?
What build are you running ?


Mike

-----Original Message-----
From: orca-users-bounces+mike.normandin=credit-suisse.com at orcaware.com
[mailto:orca-users-bounces+mike.normandin=credit-suisse.com at orcaware.com
] On Behalf Of KHo at skylinenet.net
Sent: Tuesday, December 23, 2008 8:49 PM
To: orca-users at orcaware.com
Subject: [Orca-users] New errors


Hello,

I have orca running smoothly for a while and all of a sudden I get these
errors and now orcallator doesn't even start.  Can anyone tell me what
these are?


Warning: Cannot init kvm: Illegal seek
Warning: Kvm not initialized: Variables will have invalid values: Near
line 1100
Warning: Cannot init kvm: Illegal seek
Fatal: subscript: 7 out of range for: GLOBAL_net[7]


Thanks,

_______________________________________________
Orca-users mailing list
Orca-users at orcaware.com
http://www.orcaware.com/mailman/listinfo/orca-users


========================================================================
======
Please access the attached hyperlink for an important electronic
communications disclaimer:

http://www.credit-suisse.com/legal/en/disclaimer_email_ib.html
========================================================================
======


_______________________________________________
Orca-users mailing list
Orca-users at orcaware.com
http://www.orcaware.com/mailman/listinfo/orca-users


==============================================================================
Please access the attached hyperlink for an important electronic communications disclaimer: 

http://www.credit-suisse.com/legal/en/disclaimer_email_ib.html
==============================================================================