[Orca-users] orca stops running after a while

[Dean Thompson]

Hi there

I'm running orca on Solaris 10 SPARC.
I've successfully installed orca and related packages on one of our servers.
start_orcallator runs with no problem but when I check it later then it has stopped, without any data files generated. 
I ran /opt/RICHPse/bin/se -d /usr/local/lib/orcallator.se and it ran for a while before stopping. The last bit of output was this;

if ((buf[0]<"> != <35>) && (buf[0]<"> != <10>))
p = strtok(buf<"/ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,14" 366 "ssd"\n>, < >)
n = atoi(strtok(<(nil)>, < >))
path = strtok(p<"/ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,14">, <">)
if (path</ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,14> =~ </node>)
if (str2int_put(path_tree<4310522656>, path</ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,14>, n<366>) == <-1>)
status = avlinsert(tree<4310522656>, ((ulonglong) tag</ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,14>), data<366>, &anp<4464615664>)
switch(status<2>)
node = *((anode_t *) anp<4464615616>)
if (status<2> == <0>)
node.an_tag = ((ulonglong) strdup(tag</ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,14>))
node.an_data = data<366>
struct_empty(node(STRUCTURE), anp<4464615616>)
return <0>;
if ((buf[0]<"> != <35>) && (buf[0]<"> != <10>))
p = strtok(buf<"/ssm at 0,0/pci at 1a,600000/SUNW,qlc at 2/fp at 0,0/ssd at w5006016041e058da,13" 367 "ssd"\n>, Hangup

What could the problem be?

Regards
Dean


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: </pipermail/orca-users/attachments/20100623/3d19ca5e/attachment.html>