[Orca-dev] Re: orca charts recognize host bus adaptor attached disk

[dave.pyles at boeing.com]

OK  I got orca 27b2 to run (perl 5.6.1) using the data gathered with
the latest orcallator.se, I do now see the sd108, sd109, sd110 fibre
attached disks in the run percentage chart.
I thought there might be some other disk charts, but I guess all the
other disk info is per file system.

Thanks for the help,

Dave

--- In orca-developers at y..., dave.pyles at b... wrote:
> # more INSTALL
> Outline:
>
>  1) Install Perl 5.004_01 or later.
>
> # perl -v
>
> This is perl, version 5.004_04 built for sun4-solaris
>
> This was the same exact copy I used when I originally installed orca
> 26beta1.
>
> I see sunfreeware.com has 5.6.1, hopefully I won't have to add a lot
> of modules to use it.
>
> Dave
>
> --- In orca-developers at y..., Blair Zajac <blair at o...> wrote:
> > Which version of Perl are you using?  Different versions parse
Perl
> > differently and I don't test Orca on all Perls, just 5.6.1.
> >
> > Blair
> >
> > dave.pyles at b... wrote:
> > >
> > > The new orcallator.se doesn't seem to work right when processed
by
> my
> > > older version (26beta1) of orca, so I've downloaded 27b2. I went
> > > through the configure/make/install cycle and the new version
won't
> > > run. I guess I need to go back to orca-users now and figure out
> what's
> > > wrong:
> > >
> > > # ./bin/orca -v -o lib/orcallator.cfg
> > > Ambiguous use of require => resolved to "require" => at
> > > /opt/orca/lib/Orca/Config.pm line 76.
> > > Ambiguous use of {require} resolved to {"require"} at
> > > /opt/orca/lib/Orca/Config.pm line 314.
> > > Ambiguous use of {require} resolved to {"require"} at
> > > /opt/orca/lib/Orca/Config.pm line 315.
> > > Ambiguous use of {index} resolved to {"index"} at
> > > /opt/orca/lib/Orca/Config.pm line 1009.
> > > Ambiguous use of {index} resolved to {"index"} at
> > > /opt/orca/lib/Orca/Config.pm line 1018.
> > > Ambiguous use of {index} resolved to {"index"} at ./bin/orca
line
> 707.
> > > Ambiguous use of {index} resolved to {"index"} at ./bin/orca
line
> 707.
> > > Error in option spec: "verbose+"
> > > Error in option spec: "SCALAR(0x1f923c)"
> > > usage: ./bin/orca [options] configuration_file
> > > Options:
> > >   -daemon           Run Orca in daemon mode
> > >   -gifs             Output GIFs instead of PNGs
> > >   -logfile filename Output all messages
> > >   -no-html          Update RRD files and images but not HTML
files
> > >   -no-images        Update RRD files but not image and HTML
files
> > >   -once             Run only once and do not continue to monitor
> input
> > > files
> > >   -verbose          Verbose; list multiple times for increased
> > > verbosity
> > > Orca understands the first unique command line option, i.e. -d
for
> > > -daemon.
> > >
> > > The configure/make/make test_modules/make install_modules/make
> install
> > > seemed to run ok after I got my path to cc, make, and pod2man
> correct.
> > >
> > > config.log and config.status say exit 0
> > >
> > > I know this group isn't for help installing, I didn't expect to
go
> > > through all of this to be able to see my fibre attached drives.
> I'll
> > > go peruse the archives and try to figure out where I went wrong.
> > >
> > > Dave
> > >
> > > --- In orca-developers at y..., dave.pyles at b... wrote:
> > > > Thanks, Ive got it downloaded now. I turned on a couple of
> charts,
> > > so
> > > > now it's churning through all of the data - should take a
while.
> > > >
> > > > Dave
> > > >
> > > > --- In orca-developers at y..., Blair Zajac <blair at o...> wrote:
> > > > > OK.  That should be fixed now.
> > > > >
> > > > > Blair
> > > > >
> > > > > dave.pyles at b... wrote:
> > > > > >
> > > > > > Forbidden
> > > > > >
> > > > > > You don't have permission to access
> > > > /orca/pub/orcallator.se-1.30b1.txt
> > > > > > on this server.
> > > > > >
> > > > > > I'd like to check this out, but I can't get to it.
> > > > > >
> > > > > > Please fix the permissions on this file
> > > > > >
> > > > > > --- In orca-developers at y..., Blair Zajac <blair at o...>
wrote:
> > > > > > > Dave,
> > > > > > >
> > > > > > > Try the latest orcallator.se version at
> > > > > > >
> > > > > > >
> > > http://www.orcaware.com/orca/pub/orcallator.se-1.30b1.txt
> > > > > > >
> > > > > > > which includes Alan's work.
> > > > > > >
> > > > > > > Best,
> > > > > > > Blair
> > > > > > >
> > > > > > > alegrand at w... wrote:
> > > > > > > >
> > > > > > > > Dave,
> > > > > > > >
> > > > > > > >           Have you tried the USE_RAWDISK switch in
> > > > orcallator.se
> > > > > > It was
> > > > > > > > added
> > > > > > > >           specifically to monitor  disks that were
being
> > > > missed.
> > > > > > > >
> > > > > > > > Alan LeGrand
> > > > > > > >
> > > > > > > > -----Original Message-----
> > > > > > > > From: Pyles, Dave [mailto:dave.pyles at b...]
> > > > > > > > Sent: Wednesday, October 10, 2001 3:21 PM
> > > > > > > > To: 'orca-developers at y...'
> > > > > > > > Cc: 'Rich Pettit'
> > > > > > > > Subject: orca charts recognize host bus adaptor
attached
> > > disk
> > > > > > > >
> > > > > > > > Hello all,
> > > > > > > >
> > > > > > > > I've been using orca charts for a while to monitor
> several
> > > Sun
> > > > > > E6000 and
> > > > > > > > E6500 systems. We recently got some new F6800 Sun-Fire
> > > systems
> > > > and
> > > > > > we are
> > > > > > > > attaching Compaq MA8000 disk arrays to them via Qlogic
> > > QLA2200
> > > > > > Host Bus
> > > > > > > > Adaptor (fibre) cards. I downloaded SE Toolkit 3.2.1
and
> I
> > > am
> > > > > > using the July
> > > > > > > > version of orcallator.se that comes with it. SE
Toolkit
> does
> > > > not
> > > > > > see the
> > > > > > > > fibre attached drives. I have  corresponded with Rich
> Pettit
> > > > on
> > > > > > this issue
> > > > > > > > but we have not come up with a way to deal with them
> yet.
> > > > After
> > > > > > poking
> > > > > > > > around, I determined that they are sd108, sd109, and
> sd110.
> > > I
> > > > can
> > > > > > find these
> > > > > > > > entries in kstat. They are configured as pseudo
devices
> and
> > > > show
> > > > > > up in
> > > > > > > > /var/adm/messages and /kernel/drv/ldLite.conf. I'm
> wondering
> > > > if
> > > > > > there is a
> > > > > > > > workaround to get them into my orca charts. Is there
> some
> > > way
> > > > to
> > > > > > tweak
> > > > > > > > orcallator.se to use a file containing sd names so it
> can
> > > read
> > > > > > kstat info
> > > > > > > > into the percol files for orca? I have some
programming
> > > > > > experience, but I'm
> > > > > > > > not an expert programmer by any means (I'm a sys
admin,
> Jim,
> > > > not a
> > > > > > doctor).
> > > > > > > > Any suggestions?
> > > > > > > >
> > > > > > > > Dave Pyles
> > > > > > > > dave at p...
> > > > > > > > dave.pyles at b...
> > > > > > > >
> > >
> > >                    Yahoo! Groups Sponsor
> > >                           [Image]
> > >
> > >
> Service.