[Orca-users] Re: Orca Startup Problem
Phillip B. Bruce
pbbruce at mindspring.com
Sun Oct 7 20:32:04 PDT 2001
Blair Zajac wrote:
> Phillip,
>
> Can you email the complete output from running start_orcallator?
>
> After you do this, try running
>
> se -DWATCH_OS orcallator.se 5
>
> and see if there's any output. If not, then there's a problem with
> your
> installation of SE or a particular issue with orcallator.se on your
> system.
> Which OS and hardware are you using?
>
> Just ignore orca.state, touching it or doing anything with it won't
> fix the
> issue, it'll just make a warning message go away. There's nothing in
> there
> that'll cause Orca to find the files it needs to load.
>
> Blair
>
> "Phillip B. Bruce" wrote:
> >
> > Blair Zajac wrote:
> >
> > > Can you put the complete list of commands and error messages from
> > > running
> > > start_orcallator? There's not enough information there to work
> off
> > > of.
> > >
> > > Several questions:
> > >
> > > Are you running orcallator as root?
> > >
> > > Is /opt a NFS mounted filesystem on this system?
> > >
> > > Blair
> > >
> > > "Phillip B. Bruce" wrote:
> > > > Blair,
> > > >
> > > > This is what I did so far.
> > > >
> > > > 1. stop_orcallator
> > > >
> > > > 2. start_orcalltor
> > > > ./orcallator_running
> > > >
> > > > 3. Now in /opt/orca/var/orca/orcallator
> > > > ./orcallator_running: okieland/percol-2001-10-07 does not exist
> > > >
> > > > Keep in mind that I'm so frustrated that I removed everything
> from
> > > the
> > > > 2.6 version and re-installed.
> > > > I had to manually do a touch orca.state to get orcallator up but
>
> > > still
> > > > keep running into this problem.
> > > >
> > > > This is what OS I'm running which is 2.8
> > > > uname -a
> > > > SunOS okieland 5.8 Generic_108529-10 i86pc i386 i86pc
> > > >
> > > > #more /etc/release
> > > > Solaris 8 10/00 s28x_u2wos_11 INTEL
> > > > Copyright 2000 Sun Microsystems, Inc. All Rights
> > > Reserved.
> > > > Assembled 28 August 2000
> > > >
> > > > Now any further suggestion would be appreciated.
> >
> > >
> Service.
> >
> > Blair,
> >
> > Orcallator is running as root.
> > No NFS services.
> >
> > This is a standalone system that orca is running on what else
> do
> > you need to
> > know.
> >
> > orca -o -v lib/orcallator.cfg
> > Orca version 0.264 using RRDs version 1.000331 at Sun Oct 7
> 19:17:37
> > 2001.
> > /opt/orca/bin/orca: warning: cannot open state file
> > `/opt/orca/var/orca/rrd/orcallator/orca.state' for reading: No such
> file
> > or directory
> > Creating orca.gif.
> > Creating rrdtool.gif.
> > Finding files and setting up data structures at Sun Oct 7 19:17:37
> > 2001.
> > /opt/orca/bin/orca: warning: no files found for `find_files' for
> `group
> > orcallator' in `lib/orcallator.cfg'.
> > RSS VSZ %MEM TIME USER PID COMMAND
> > 3876 4748 1.6 0:01 root 1263 /usr/bin/perl
> > Current running time is 0:00 minutes.
> > /opt/orca/bin/orca: no data files found. Make sure `find_files'
> > parameter is set properly.
> >
> > Again unless I do the following:
> >
> > # touch orca.state
> >
> > The find_files for group orcallator with no data files found. I have
>
> > everything configured correctly.
> > As I have repeatedly stated that I've have removed and started all
> over
> > again and again on this.
> >
> > So far I'm not all that impressed at least not with installation and
>
> > configuration. Compiling was not
> > an issue and worked just fine. Also SETOOLS installations requires
> that
> > SEPATH be set. Your only neededing
> > it for accuracy so the perl can pick up the path in case MORONS who
> > cannot understand the purpose of environment
> > variables or even the use LD_LIBRARY_PATH variables. Which is a good
>
> > thing to do but a little more work on
> > your part could have prevented that also.
> >
> > You have a good program and I was impressed when 2.6 was installed
> and
> > only had a small issue. It seems like
> > that is all falling apart since then.
> >
> > --
> > ************************************************************
> > *** Phillip B. Bruce ***
> > *** http://pbbruce.home.mindspring.com ***
> > *** pbbruce at mindspring.com ***
> > *** ***
> > *** "Have you ever noticed? Anybody going slower than ***
> > *** you is an idiot, and anyone going faster than you ***
> > *** is a maniac." - George Carlin ***
> > ************************************************************
>
> Yahoo! Groups Sponsor
[Image]
>
Blair,
Here is the much need out put that you need. Let me know what the
next steps are.
As for SETools is running version 3.2.1 and everything with it run's
correctly.
A thought to keep in mind which orcallator.se should be running the
one that comes
with SETools or yours. Why have so many?
--
************************************************************
*** Phillip B. Bruce ***
*** http://pbbruce.home.mindspring.com ***
*** pbbruce at mindspring.com ***
*** ***
*** "Have you ever noticed? Anybody going slower than ***
*** you is an idiot, and anyone going faster than you ***
*** is a maniac." - George Carlin ***
************************************************************
-------------- next part --------------
Script started on Sun Oct 07 20:22:18 2001
# find /opt/orca -name orca.state -print
# ls
bin doc html lib man var
contrib examples include logs orca.txt
# ps -ef | grep orca
root 1314 1308 0 20:23:25 pts/8 0:00 grep orca
root 1307 1306 0 20:22:18 pts/5 0:00 script orca.txt
root 1306 473 0 20:22:18 pts/5 0:00 script orca.txt
#pwd
/opt/orca
# cd bin
# ls
S99orcallator orcallator_running rrdupdate upgrade_installation
nohup.out restart_orcallator start_orcallator
orca rrdcgi stop_orcallator
orcallator_column rrdtool trytime
# ./start_orcallator
Writing data into /opt/orca/var/orca/orcallator/okieland/
Using www access log file /usr/local/apache/logs
Starting logging
Sending output to nohup.out
# ./orcallator_running
Now in /opt/orca/var/orca/orcallator
./orcallator_running: okieland/percol-2001-10-07 does not exist.
# more no p more nohup.out
# se -DWATCH_OS orcallator.se 5
"stdin", line 0: fatal: Cannot open orcallator.se
# pwd
/opt/orca/bin
# cd ..
# ls
bin doc html lib man var
contrib examples include logs orca.txt
# cd lib
# se -DWATCH_OS orcallator.se 5
"/opt/RICHPse/include/kstat.se", line 418: mknod: argument mismatch
"/opt/RICHPse/include/kstat.se", line 418: mknod: argument mismatch
"/opt/RICHPse/include/kstat.se", line 447: mknod: argument mismatch
"/opt/RICHPse/include/kstat.se", line 447: mknod: argument mismatch
"/opt/RICHPse/include/kstat.se", line 418: error: syntax error
"/opt/RICHPse/include/kstat.se", line 418: fatal: Errors detected. Exiting.
# ^D
script done on Sun Oct 07 20:25:27 2001
More information about the Orca-users
mailing list